06 March 2009

Cement board already in place at the roof top.

Today is a weekend in Kuala Terengganu. However, my workers still work today and they have managed to complete fixing the cement board to the roof top. This cement board which is 6mm thick will act as ceiling as well as false work for the roof slab. Above the cement board will be a layer of aluminium foil insulation, a layer of BRC A6 and 2 1/2" thick concrete. Besides working on the roof my workers have also be doing internal plastering for the 2nd Floor wall after having finished the 3rd Floor wall. I have asked my workers to add more lime to the plaster as swiftlets prefer lime to rare cement.

Cement board already fixed to timber roof joists seen from below


"Power is no blessing in itself, except when it is used to protect the innocent." -Jonathan Swift (1667-1745)

3 comments:

K L said...

may I know what are the structural loadings of roof slab and floor slabs ?

Tirokswifts said...

K.L,

The cement board sits on the 2" x 4" red meranti timber spaced 2'0" apart. Besides acting as nesting plank also it acts as joist and used to transfer the load of the cement board to the RC beams. The 2" x 4" timber struts also spaced at 2' 0" cnetres act to strengthen the joists. The joists are laid on top of the RC beams. The roof slab is meant to accomodate a pool of 8" water and to improve the strength I will add a 2 1/2'' RC slab reinforced with a layer of BRC No. A6. The floor will be for traffic of less than 4 person at any one time.

K L said...

Real light weight then. Thks.